Tyre pressures at Castle Combe
The lap, to scale. Track outline © OpenStreetMap contributors (ODbL).
How hard a circuit works each corner of the car shows up as tread temperature, and temperature is what sets pressure. GripCalc carries corner heating figures for Castle Combe as a starting point: how much hotter each tyre runs over the session's base temperature, from the layout's mix of corners and load. They pre-fill the calculator when you pick the circuit, and your own pyrometer readings refine them from the first session.
| CORNER | RUNS HOTTER BY, °C |
|---|---|
| Left front | +2.5 |
| Right front | +2.0 |
| Left rear | +3.5 |
| Right rear | +3.0 |
ESTIMATED — class-based starting values over an 85°C session base, derived from this layout's type (direction, speed profile, load), and shared with circuits of similar character rather than measured here. Not gospel: enter your own pyrometer figures after a session and they take precedence.
What Castle Combe asks of a tyre
Castle Combe is an old airfield perimeter: very fast, gently cambered, and famously bumpy in places. Quarry and Tower are proper stops out of sustained speed, and the two chicanes ask the car to change direction hard over kerbs. High average speed keeps tread temperature up; the bumps make stable pressures matter more than usual.
Bumps punish over-pressured tyres with skipping and inconsistent contact
Quarry's braking zone from high speed works the fronts hard
Chicane kerbs strike the inner shoulders
A 992 GT3 on Cup 2 R at Castle Combe
Published hot target 30.5 / 32.0 psi at 92°C tread, on a 15°C morning, with the corner figures above: cold set 21.4 / 21.5 front, 22.5 / 22.6 rear. A different car, tyre or morning moves every number, which is what the calculator is for.
Knockhill · Cadwell Park Full · Cadwell Park Woodland · Croft Circuit · All 45 circuits