Tyre pressures at Snetterton 200
The venue as mapped, to scale. Snetterton 200 is one of 2 layouts sharing this tarmac, and its exact course differs from the full-circuit outline shown. Track outline © OpenStreetMap contributors (ODbL).
How hard a circuit works each corner of the car shows up as tread temperature, and temperature is what sets pressure. GripCalc carries corner heating figures for Snetterton 200 as a starting point: how much hotter each tyre runs over the session's base temperature, from the layout's mix of corners and load. They pre-fill the calculator when you pick the circuit, and your own pyrometer readings refine them from the first session.
| CORNER | RUNS HOTTER BY, °C |
|---|---|
| Left front | +2.0 |
| Right front | +1.5 |
| Left rear | +3.0 |
| Right rear | +2.5 |
ESTIMATED — class-based starting values over an 85°C session base, derived from this layout's type (direction, speed profile, load), and shared with circuits of similar character rather than measured here. Not gospel: enter your own pyrometer figures after a session and they take precedence.
What Snetterton 200 asks of a tyre
The 200 layout cuts the lap short after Agostini and rejoins before Coram, trading the second straight for a tighter, busier rhythm. Less cooling time than the 300 means temperatures sit higher for the same driving, and the braking-heavy character remains.
Higher steady-state temperatures than the 300; start cold pressures conservative
Braking zones still dominate the front tyres' day
The Coram-to-chicane sequence rewards a stable left front
A 992 GT3 on Cup 2 R at Snetterton 200
Published hot target 30.5 / 32.0 psi at 92°C tread, on a 15°C morning, with the corner figures above: cold set 21.5 / 21.5 front, 22.6 / 22.6 rear. A different car, tyre or morning moves every number, which is what the calculator is for.
Oulton Park International · Oulton Park Island · Oulton Park Fosters · Castle Combe · All 45 circuits